PDA

View Full Version : Suggested spec entry list



Traveler
04-30-2004, 09:02 PM
NOTHING IS REQUIRED, Please do not post information too personal, or anything you are uncomfortable with!

Year:
#1 ENTER DATA#

Model
#2ENTER DATA(e.g. C-350 Classic)#


Came From Factory as:
#3 ENTER DATA (e.g. F350 Crewcab)#

Vin: #
#4 ENTER DATA#

Vehicle history that I know:
#5 ENTER DATA#


DRIVETRAIN
Engine:
#6 ENTER DATA#
Transmission:
#7 ENTER DATA#
Transfercase:
#8 ENTER DATA(model electronic, or manual)#
Rear end:
#9 ENTER DATA#
Rear end Ratio:
#10 ENTER DATA#
Front Axle:
#10.5 ENTER DATA# (model number or 2 wheel drive)
Front hubs:
#11 ENTER DATA#
Wheels:
#12 ENTER DATA#
Tires:
#13 ENTER DATA#
Fuel Tank:
#14 ENTER DATA(gallons, and single or dual)#
Weight:
#15 ENTER DATA(lbs)#
Length:
#16 ENTER DATA (inches)#
Height:
#17 ENTER DATA#
Width:
#18 ENTER DATA#
Wheelbase:
#19 ENTER DATA#

INTERIOR OPTIONS
Cloth or leather:
#20 ENTER DATA#
Front seats:
#21 ENTER DATA(bench or 40/20/40,captains & console)#
Power seat:
#22 ENTER DATA (driver's only or both)#
Second row seating:
#23 ENTER DATA (captains or 60/40)#
Third row:
#24 ENTER DATA (lay done bed, quick release bronco style)#
Heat AC:
#25 ENTER DATA#
Rear heat:
#26 ENTER DATA (overhead mounting or Floor)#
Rear AC:
#27 ENTER DATA (overhead mounting, or floor)#
Rear window Defrost:
#28 ENTER DATA#
Power Windows:
#29 ENTER DATA (front only, or all four)#
Power Door Locks:
#30 ENTER DATA#
Power Tailgate window:
#31 ENTER DATA#
Cruise Control:
#32 ENTER DATA#
Stereo:
#33 ENTER DATA (Cd, or Cassette, premium sound?)#
Speakers:
#34 ENTER DATA (4 or 6 or ?)#
Instrumentation:
#35 ENTER DATA (full with Tach, or additional?)#
Overhead console:
#36 ENTER DATA#
Dash and Door trim:
#37 ENTER DATA#
Glass:
#38 ENTER DATA (tinted, or not)#
Spare tire Carrier:
#39 ENTER DATA (mounted inside or ?)#
Other:
#40 ENTER DATA (floor mats, overhead assist handles, TV, radar dectector, heated cup holders, or what?)#


EXTERIOR OPTIONS
Paint:
#41 ENTER DATA (e.g. Eddie bauer paint scheme, or custom graphics)#
Running boards:
#42 ENTER DATA (fiberglass, aluminum, none)#
Mirrors:
#43 ENTER DATA(towing swing away, or power sport)#
Roof Rack:
#44 ENTER DATA#
Reciever Hitch:
#45 ENTER DATA#
Rear Bumper:
#46 ENTER DATA#
Tow package:
#47 ENTER DATA#
Front air Dam:
#48 ENTER DATA#
Grille Guard:
#49 ENTER DATA#
Rear wind deflector:
#50 ENTER DATA#
Other:
#60 ENTER DATA(e.g. Accent stripe, rear camp light, Key guards)#
Misc Centurion notes:
#61 ENTER DATA(e.g. frame spliced? where? shortened or lenghtend? Roof seam or seams? Dual tank switch still under dash?)#
My current Mods:
#62 ENTER DATA#

My Future Mods:
#63 ENTER DATA#

anything else and on to the pics.
#64 ENTER DATA#


Okay here are the instructions.

1) Click on "Quote" in my original post up in the right hand corner.
2) ?Highlight the original message.
3) Right Click
4) ?Select copy

5) Start your new message
6) Right click on the message box
7) select paste
8) read down through the lines of code and text, anywhere you see # sign that is where you ENTER DATA.

Delete the # signs, and everything in between, there are always 2 # signs. Enter your info and scroll down to the next one.

There are 64 places to enter data, I have numbered them 1-64, of course. I thought about numbering them 212-276, but that seemed silly.

If you want to leave the field blank, delete the # signs and everything in between.

If you want to come back and finish it later, leave the number to help you find it again.

Traveler
04-30-2004, 09:04 PM
What do you guys think?
what do we need to add? or remove?

I can pin it after we get it figured out.
I am also checking to see if the board software will allow us to make is a template which would be much easier for us to enter the data.

4doorbronko
04-30-2004, 09:14 PM
That looks good to me.
Might want to stick a note by the Vin. question that it's not manditory and they don't have to post the whole VIN, just the first half to allow de-coding?

bob
04-30-2004, 09:49 PM
thats it. as long as we have "others" cant see any problems.

Traveler
04-30-2004, 09:53 PM
Here's a thought,

highlight the original post,
right click,
Copy,

paste in your new message,
remove the words you don't want
add what you do.

I have to quit tonight, I still think I can make a template easier to enter data with,
So if you haven't started a profile you nay want to wait a day and see what I can get done.

bob
04-30-2004, 10:16 PM
Check out My new one copyed and pasted,worked fine. I think we need questions to be a diferant collor than our answers.

aw2oban
05-01-2004, 03:42 AM
at the risk of being lazy let me know when you get the template worked out and I'll post both of mine. Not to mention I need to update the avatar!!!

Traveler
05-01-2004, 08:46 AM
Quote[/b] (bob @ April 30 2004,9:16)]Check out My new one copyed and pasted,worked fine. I think we need questions to be a diferant collor than our answers.
I was thinking the same thing, If I change my color to post it, It will change my color in every post, so I will try and get something done.

bob
05-01-2004, 10:47 AM
there was a test user can you use that acount, or make up a diferent acount, or an admin acount.

Traveler
05-01-2004, 12:01 PM
The colors will not copy.

Bob that is an excellent Idea, I will set up another member and we will do that.

is the Font size and color okay?

bob
05-01-2004, 12:20 PM
font is good color is unique.

Traveler
05-01-2004, 03:45 PM
I know what I am doing wrong, I need to paste the code so you guys can copy the code, instead of the post.

bob
05-01-2004, 04:54 PM
text? code? font?
I am still trying to figure out how a box of klenex works.

Traveler
05-01-2004, 06:33 PM
Well Bob, you don't seem to have anything better to do.

Okay here are the instructions.

1) Click on "Quote" in my original post up in the right hand corner.
2) Highlight the original message.
3) Right Click
4) Select copy

5) Start your new message
6) Right click on the message box
7) select paste
8) read down through the lines of code and text, anywhere you see # sign that is where you ENTER DATA.

Delete the # signs, and everything in between, there are always 2 # signs. Enter your info and scroll down to the next one.

There are 64 places to enter data, I have numbered them 1-64, of course. I thought about numbering them 212-276, but that seemed silly.

If you want to leave the field blank, delete the # signs and everything in between.

If you want to come back and finish it later, leave the number to help you find it again.

Sorry, with this version of board software, I cannot make it any easier.

Give it a shot and let's see if it works.

bob
05-01-2004, 07:52 PM
It worked, I like it. Good job. Its a little harder to follow than the first, but worth the result.

I Would lik to see the first with the color, but I think we could use this one.

Traveler
05-01-2004, 08:04 PM
What did you like about the first, The fact that your information was beside it rather than underneath?

Or not underlined,

Or is the Font too big?

it's not hard to change now, and I can edit yours rather than making you do it over again, althouth that would be funny, this is what the 3rd time. http://www.fourdoorbronco.com/temp/iB_html/non-cgi/emoticons/biggrin.gif

bob
05-01-2004, 08:31 PM
The lay out is fine.Its filling it in thats harder to read. It was nice to have just the question with out all of the code,but it is much better after wards, having the color.


I dont mind testing (guinea pig)

bob
05-09-2004, 08:06 AM
If there are no other recomended changes at this time,I think we should use this as the template.